Look through the eyepiece while focusing on the interface on the screen. In the event you do not, the system will ask you if you wish to update the device every time you turn it on. NOTE Once the device has been updated you will need to either format the card or delete the update file manually. It is important not to use additional sources of power during firmware update! NOTE If the device does not restart within 30 seconds, remove and re-insert the batteries and power-up the device. NOTE: In the event of a power failure during an update the device may crash corrupting its system files and will need to be sent back to the ATN factory for service. To update the new firmware you will need a MicroSD Card and batteries that are fully charged. Before operating your device please update the firmware to the latest version. When it pops up a few millimeters, it can be pulled with your fingers or tweezers. To remove the microSD Card from the slot, push it in using the same thin object. Do not force the card into the slot as it may damage both the device and the card itself. To open the cover you should gently lift the rubber cover and move it out of the way. You can find them under the rubber cover near the battery block we marked the cover with appropriate icons. They will provide much longer battery life.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |